JDMIX D-Series Inline Static Mixers

for Your Inline Blending Needs

The JDMIX, Inc. “D” Series inline mixers are specifically designed for use where an additive to the main pipeline flow can be injected right into the mixer body. These unique inline mixers have four mixing zones between each element set. Inside each zone, the increased turbulence realized ensures that the chemical additives are dispersed throughout the circumference of the pipeline. The first section of the element redirects the flow from the top of the pipe wall, forcing it to the bottom. The second section reverses the process, forcing the flow back to the top. The same mixing action takes place from side-to-side of the pipe wall. Using between two and six mixing elements, with velocities ranging from 1 – 10 feet per second, mixing is completed. In addition, the angles of the elements can be changed to meet pressure drop restrictions in gravity feed applications, or where pump pressure is limited.

Housing:
Carbon Steel, schedule 40
Stainless Steel, schedule 40
PVC, schedule 80
Fiberglass, 150 psi rated filament wound

Flanges:
ANSI B 16.5 - 150 lb. Drilling
Carbon Steel & Stainless Steel - RFSO
PVC - 3" & Above - Raised Face
PVC - 3/4 - 2" - Flat Face
FRP - Flat Face
Symbol / Material
S = Stainless Steel
C = Carbon Steel
P = PVC
F = Fiberglass

Note: Larger sizes and other materials available.

To Request a Static Mixer Quote online, click here.

 

 

  © 2003- JDMIX, Inc., All rights reserved.